Fireproof MGO Board grey color
Brief introduction
Grey color MGO board is getting more and more populor by now, they can be used instead of fiber cement board, because of similar color-grey color. However be compared with fiber cement board, grey MGO board is fireproof A Grade, high quality. It is easy to cut, to install. Most important is that MGO board is low cost building material for projects, will make huge profit for you. More detail informaiton, pls go on to read it as follow:
Composition of grey color MGO board
All MGO boards produced by our company are 100% asbestos-free, it is formaldehyde-free and benzene-free.
Grey color MGO board specifications
Thickness: 3mm; 5mm; 6mm; 8mm; 9mm; 10mm; 12mm; 15mm; 18mm; 20mm.
Max width: 1220mm
Max length: 3000mm
Other special sizes also can be produced according to customer's request or project.
Color of MGO board
Besides grey color, white or green or red or pink color is OK, too.
Edge of MGO board
Square/Tapered/Beveled
Features of MGO board:
A. Mineral based: The main ingredient is magnesium oxide environmentally friendly. It does not contain asbestos or any other known toxic material
B. Fireproof: A same material is used in some parts of the world to line industrial blast furnaces
C. Water resistant: And does not leach
D. Flexible: Does not break or crack easily. Wastage is therefore reduced. Flexibility is enhanced when wet.
E. Impact resistant: 6mm MGO boards are at the same level with 9-12mm gypsum boards
F. Thicker MGO boards 8-12mm are much stronger
Where can be used for MGO board?
1. Commercial building: Commercial mansion, public place of entertainment, market and hotel
2. Industrial building: Factory, warehouse.
3. Residential housing: New-type house, fitting up renovating.
4. Public place: Hospital, theater and station
Where are our advantages?
1. A Grade fireproof by mainland china's NFTC.
2. Made from natural inorgnanic materials. 100% no asbestos, innocuity.
3. Huge output, short delivery time. Producing up to 18000m2 daily.
4. Can be customized for your project, for your request. Eg: 1200*3600mm
Heading |
Unit Used |
Inspection value |
Standard |
Density |
kg/m³ . |
0.96-1.12g/cm³ |
GB/T7019-1997 |
Fire ratings |
grade |
A1 |
GB 8624 |
Thermal Resistance |
m² K/W |
1.14m² K/w |
GB/T13475-92 |
Bending Resistance (Dry) |
≤ Mpa |
18Mpa |
GB/T7019-1997 |
Bending Resistance (Fully Absorbed in Water) |
≤ Mpa |
22Mpa |
GB/T7019-1997 |
Sound Insulation |
dB |
≥ 44dB |
GBJ121-88 |
Absorption Moisture |
≤ % |
≤ 15% |
GB/T7019-1997 |
Tensile Strength |
≤ Mpa |
8-13Mpa |
GB/T7019-1997 |
Impact Resistance |
kj/m² |
Between 2.0-2.5 are qualified,
for 4mm, our board could reach 4.5 kj/m2.
so our boards are good. |
CNS 13778 |
Thickness |
mm |
3mm-20mm |
|
Specification |
mm |
1220*2440; 1200*2700; 1200*3000 |
|
Color |
|
white, grey, green and red |
|