Fiber cement wall cladding
It is the similar wall products with Nichiha from Japan. Our production line also be imported from Japan. Frankly talking, our material is a little difference from Janpa more or less. That is why or price is much lower then Japan. But we can warranty its quality to be good enough for exterior wall. We also do exporting all the time since 2008. So if you are interested in it. Pls email to me any time.
Standard sizes: 3000*615*14-16mm
All kinds of surface pattern can be chosen according to your project.
Other size also can be produced according to customer request.
Main characteristic:
Density: No less than 1.20g/cm3
Wet inflation rate: Not higher than 0.2%
Water absorption: 25%
Clutching nail force: >600
| Detect items |
Index |
| Folding strength under the natural dampish state (Mpa) |
11±2 |
| Fold strength after be dipped in water for 24 hours Mpa |
More then 8.5 |
| Drying shrinkage |
Less then 0.06% |
| Tensile strength on the vertical plane Mpa |
More then 0.5 |
| Resistance to impact(500g hammer weight,12mm thick panel) |
Dropping from 1100mm meter, and has no penetrating cracks |
| Anti-folding elastic modulus(Mpa) |
More then 3000 |
| Density(T/M3) |
1.1-1.4 |
| Thickness expansion coefficient(%)after being dipped in water for 24 hours |
Less then 1.5 |
| Fire resistance |
B1 level |
| Moisture content(%) |
10±5 |
| Clutching nail force |
More then 600 |
| Heat conductivity coefficient(w/m.k) |
0.19(density 1200kg/m3 |
| Surface water resistance |
No change within 96 hours |
| Surface alkali fastness |
No change within 48 hours |
| Surface washing fastness |
More then 5000 times |
| Surface aging resistance |
No change within 1000 hours |
| Contamination resistant |
Less then 15% |
| Sound insulation value |
36dB(single panel) |
| Bend degree after water absorption |
Bend less than 3mm after water absorption |
| Water absorption |
25% |
| Bond strength in cyclic test under the damp condition N/mm2 |
More then 0.3 |
| Thickness expansion rate after the cyclic test under the damp condition % |
1.5% |
| Ultraviolet irradiation |
More then Has no change, no crusting,no peeling within250hours |
| -40C |
The size and surface do not change after being frozen |
| Distortion performance under the wind pressure |
Third level (GB/T15225-94) |
| Anti seismic within the distortion performance in the plan |
First level (GB/T18250-2000) |
Audited Supplier 
){kind=link}
){kind=link}