New product HPL laminated decorative mgo wall board
Composition: The materials of HPL laminated MGO board are Magnesia(MgO), Magnesium Chlorid(MgCl2) and Alkali glass fiber net, and melamine laminated on both sides of the board.
Main Characteristic:
1. Super environmental protection
A green product, zero radioactivity, does not contain formaldehyde, heavy metals and other harmful substances. It does not produce any harmful gases and smoke when meet high temperature or fire. The surface is non-toxic, and can be touched with food in food shop.
2. Excellent performance on pollution resistant and antibacterial
The surface does not have holes, and this is good for antibacterial. It also has good performance on the prevention of alkaline or acidic agents, iodine tincture and blood.
3. Easy to clean. The high density surface can prevent the permeation of dirt, and can be easily cleaned out with a piece of wet cloth. Also, you can use the detergent to clean the surface.
4. Damp-proof. The core material is inorganic material containing rear earth, and its bending strength won't slow down in wet, and also won't be corroded and mildewed.
5. High bending strength and impact resistance:
The bending strength of 5mm board can reach to 30MPA. The high density surface has good impact resistance, and can not be easily destroyed.
6. Fireproof: Grade A
7. High C/P Ratio
Low maintaining cost and long life. Easy for processing and installation which can save a lot of time
8. Excellent decorative effect
Plenty of color patterns and modern style making the special decorative effect.
| Core Material: |
MgO board |
| Front Surface: |
HPL |
| Back Surface: |
HPL frontside / HPL backside/ standard MgO board backside |
| Composition: |
One-sided: HPL + MgO,
Two-sided: HPL + MgO + HPL |
| Size: |
Standard size: 1,200*2,400mm
Max size: 1,200*3,000mm
Special size can be customized. |
| Thickness: |
MgO board 3 to 12mm, HPL sheet: 0.5 or 1.2mm |
| Glue: |
Grade E0 formaldehyde glue |
| HPL color: |
Solid color (such as white, red, blue, orange, green, ect.) & wood grain (such as beech, cherry, walnut, teak, oak, maple, sapele, ect.). More than 300 kinds of color are available. |
| Surface Treatment: |
Matt, textured, glossy or embossed |
| Usage: |
Partition wall
Interior wall surface
Furniture making
Whole kitchen |
Application:
1. Can be widely used for decorative materials of interior walls bathroom, sliding doors, ceilings, kitchens etc.
2. Can be widely used for the body of furniture and laminated floor.
3. Can be widely applicable to table, door and furniture, surface toilet partition, laboratory worktop, wall cladding etc.
4. Can be widely used for hotel clubs, bars, restaurants ans so on.
| Normal Size: |
1220mm×2440mm |
| Max Width: |
1220mm |
| Max Length: |
3000mm |
| Thickness Range: |
3-20mm |
| Availiable color: |
White,grey,green,red and pink |
| Fireproof |
A grade (GB8624) |
| Density |
0.96-1.03g/cm3 (GB/T7019-1997) |
| Intensity of bending resistance when dry |
18Mpa (GB/T7019-1997) |
| Intensity of bending resistance when moisture-saturated condition |
22Mpa (GB/T7019-1997) |
| The rate of deformation when pick up the moisture |
0.26% (GA160-1997) |
| The shrinking rate when heated |
1.0% (GA160-1997) |
| Water permeability |
There is no drop of water to emerge in the back (CNS 13778) |
| Impact resistance |
No carck,strip and run through (CNS 13778) |
| Thermal resistance |
1.14m2K/W (GB/T13475-92) |
| Sound insulation |
>44db (GBJ121-88) |
| Security |
100% no asbestos |
Audited Supplier 
){kind=link}