Exterior Wall Using Water Proof 12mm Fiber Cement Board

• Grade: Grade A
• Thickness: 12mm
• Appearance: Panel
• Color: Grey, etc
• Material: Non-asbestos
• Type: Fiber Cement Board
• Model NO.: YD fiber cement board
• Surface Finishing: Matt
• Edge: Square
• Shape: Rectangle
• Refractory Temperature: Over 2000 ℃
• Usage: Building
• Transport Package: with Pallets or Bulk Package
• Specification: 1220*2440mm or customized
• Trademark: ZJGLEADER
• Origin: China, Zhangjiagang
• HS Code: 6811820000

Product Description

Product description

No asbestos Fiber cement board used for interior wall decoration

ZJGLEADER board is the perfact choice for building board applications such as wall cladding,wall partitioning and decorative walling.The types of buildings that are suitable for ZJGLEADER board applications are residential,commercial and industrial buildings as well as shcools and hosptials;especially where speedy construction,cleanliness and hygiene is of high importance.
 

Matching the demands of modern applications

ZJGLEADER board is non-asbestos fibre-cement product composed of Portland cement,cellulose fibre and refined sand.
Using a special manufacturing process called autoclave,ZJGLEADER board acquires the strength,durability of cement and easy workability of wood as well as dimensional stability.
It can be used for both exterior and interior applications.ZJGLEADER Boards can perfectly be calibrated and then laminated or coated with other materials,such as eg. wood veneer.
 

Main Parameter

Color :Grey,Black,White,Red,Green,Yellow
Material:Cement,Quartz sand,Pulp
Size:1220*2440 mm;1220*2770 mm;1220*3000 mm
Max Width: 1220 mm
Max Length: 3000 mm
Thickness: 4-20 mm
Fire resistance: Incombustibility grade A(GB8624-A grade)


Product show

Application

-Beautiful appearance
-Good durability
-Excellent fire-proof and moisture-proof performance
-Cold and high temperature resistance
Fiber cement Parttition wall

-Low expansion rate,low shrinkage,and no deformation
-Easy processing and fixing
-Environment protection
-Surface can be coated
Interior wall decoration

Fiber cement board can be used as partition wall.                    FIber cement board can be used in interior wall decoration.
It has a very good performance in fire prevention                       At home and office decoration is very fashionable.
and moisture.

Exterior wall decorative
Cement board has a lot of color, can be used directly for the external wall decoration.


Fiber cement wood-grain Board
Cement board can be customized into a wood cement board, it has the good effect of the wall decoration.



Installation

Tools:

No special tools are required.The products can be used with normal nails,fastened by normal or self-drilling screws and cut by an electric power saw with a diamond blade.

Fixing:
ZJGLEADER board can be fixed to both timber(minimum size 1.5*3 inches) or steel frames(at least 0.55 mm thickness).The board must be supported at the edge at intermediate positions with centers not exceeding 600mm.Screws must be located more than 12mm from edges and 50mm from board corners.

Fastener:
Fasterner can be both nails and screws.It can be nailed directly to timber supports with round wire nails.For metal screws,the size and length of the screw depends on the thickness of the board and the gauge of framing.Pre-drilling the board is a must unless self-embedding,self-drilling head screws such as ZJGLEADER fic-w32(for fixing 8-12 mm board to steel frame),ZJGLEADER fix-b20(for fixing 4-6mm board to galvanized steel frame)and ZJGLEADER Fix-w45g8(for fixing 15-20 mm board to steel frame)are used.

Jointing:
Since fibre-cement board is subject to slight dimensional changes,a butt joint can be used in dry partitioning areas or where an exposed joint appearance is acceptable.For better water protection,either flexible acrylic or polyurethane based sealant can be used to seal gaps of 3-5 mm.

Our certifications
Trade Assurance

. Order quality and on-time shipment safeguards
. 100% payment refund t the Trade Assurance 

Company information
Our ZJGLEADER company used of the domestic and international advanced production technology and equipment, realized the automated production line and the whole process is in accordance with the requirements for environmental protection and energy conservation. Rigorous and efficient process control has been applied from raw material preparation to board forming, stacking, compression, steam curing and stack removal and other processes. Processing a high degree of automation, high efficiency and reliable product quality, therefore, we are able to provide the market with more professional and high-quality products.

Library

FAQ

Q: Are you trading company or manufacturer ?

A: We have our own trading company, and we have our own factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: 30%T/T deposit, 70%T/T balance payment before loading container.
If you have another question, pls feel free to contact us as below: